Heating Dissipation Liquid Silicone Glue for Solar (PV) Panels Thermal Conductive

Heating dissipation Liquid Silicone glue  for solar (PV) panels thermal conductive Product DescriptionHY-230 can be applied to the sealing and pouring of various electronic components, and then forming insulation system with no corrosion and negligible shrinkage.  ApplicationHY-230 is suitable for s

Featured Products

Heating dissipation Liquid Silicone glue  for solar (PV) panels thermal conductive

 

Product Description

HY-230 can be applied to the sealing and pouring of various electronic components, and then forming insulation system with no corrosion and negligible shrinkage.

 

 

Application

HY-230 is suitable for solar (PV) panels,bonded seal of electronic components, power module and control module, LED invertor potting, etc which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCBsubstrate, etc. 

 

Technical Parameters  

Model

Color

Viscosity (cps)

Hardness (A°)

Mixing ratio

Operating

Time(min)

Curing

Time(hr, 25ºC)

HY-230

Black/gray

5000±1000

15±3

10:1

20~30

1~2


Characteristics

Room temperature vulcanize, and easy to operate;

Maintain flexibility at a wide temperature range, and excellent insulation performance;

Waterproof, moisture-proof, mouldproof, dustproof, and stable components;

Resistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.

 

Operation instructions

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 10:1

3, Deaeration the mixture under 0.08 MPa for 3 minutes.

4, The temperature influences the curing time of 9301. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

 

 

Warm tips :

1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.

Condensation silicone which not completely cured or organic tin compounds

Sulphur, sulfide and sulfur rubber materials.

Amine compounds as well as contains the amine materials.

Pewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.

3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.

4. When it gets stratified after a period of storage, Please mix 9301 evenly before using, it does not affect the performance.

Our Company

 Hong Ye Silicon Rubber Co.,Ltd

 

We are the manufacturer specializing in molding silicone rubber ,special silicon for manual molding, shoe mold rubber, pad printing silicone,encapsulants and potting compound,addition cure liquid silicone, lifecasting,food grade silicone rubber, trademark silicone rubber, HTV silicone rubber, hot stamping silicone plate, hot stamping silicone roller, gross rubber, RTV-2 silicone rubber, silicone molds, silicone products,etc. Over 20 years, Hong Ye Silicon Rubber Family keeps efforts on marketing "Hongye" as an internationally recognized brand, and we have established more and more good relationship with our customers and have friendly communications with each other.

 

Packaging & Shipping

Heating Dissipation Liquid Silicone Glue for Solar (PV) Panels Thermal Conductive
Shelf life

Twelve(12) months when stored under dry and cool place by original package under 25ºC

This kind of product is non-dangerous product, which could be transported as general chemicals.

 

Payment Terms

1. We accept T/T,L/C for big amount.

 

2. For small amount, you can pay us by Paypal, Western Union.

 

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours